Quick Answer
Calculate Forestry Harvester Boom Hydraulic Cylinder Bore Diameter Sizing
Calculator
Need Equipment or a Supplier for This Project?
Use your calculation result to continue with equipment selection, supplier discovery, engineering support, or project evaluation.
Find Engineering Solutions →Result Interpretation
Forestry Harvester Boom Hydraulic Cylinder Bore Diameter Sizing calculator computes Cylinder Bore Diameter in m using the defined engineering formula and the input values provided. Cylinder Bore Diameter is expressed in m. No universal acceptance threshold is defined by this calculator.
Worked Example
Verified calculation
Given:
- Peak Actuation Force = 100000
- Maximum System Pressure = 21000000
Expected Result:
- Cylinder Bore Diameter = 0.077865560109203
Engineering Interpretation:
Under the given input conditions, the calculated result is: Cylinder Bore Diameter = 0.077865560109203 m.
The actual numerical result is computed by the Runtime engine using the persisted tool definition. The values shown here come from deterministically validated test cases.
Formula / Method
cylinder bore diameter = sqrt((4.0 * peak actuation force) / (3.14159265358979 * maximum system pressure))Formula family: formula_forestry_harvester_boom_hydraulic_cylinder_bore_diameter_sizing_calculator
Variables
| Symbol | Label | Role | Description |
|---|---|---|---|
| peak_actuation_force | Peak Actuation Force | INPUT | Peak Actuation Force |
| max_system_pressure | Maximum System Pressure | INPUT | Maximum System Pressure |
| cylinder_bore_diameter | Cylinder Bore Diameter | OUTPUT | Cylinder Bore Diameter |
Calculation Steps
- Enter the peak actuation force in N.
- Enter the maximum system pressure in Pa.
- Step 1: Compute cylinder bore diameter.
- Read the cylinder bore diameter (m) from the results.
Engineering Summary
Calculate Forestry Harvester Boom Hydraulic Cylinder Bore Diameter Sizing
Frequently Asked Questions
What does this calculator calculate?
The Forestry Harvester Boom Hydraulic Cylinder Bore Diameter Sizing calculator estimates Cylinder Bore Diameter based on the input parameters you provide
Why is peak actuation force important in this calculation?
peak actuation force is used directly in the calculation of cylinder bore diameter. Its effect on the result depends on the complete formula and the values of the other inputs.. When you enter peak actuation force in N, the calculator uses it in the engineering formula to compute the output
How should I interpret the result cylinder bore diameter?
The calculator outputs cylinder bore diameter in m. The result is computed directly from the input values using the defined engineering formula
What units should I use for the inputs?
Enter each value in the units shown next to the input field: Peak Actuation Force (N), Maximum System Pressure (Pa). Make sure all inputs use the specified units for consistent results
What assumptions does this calculator use?
This calculator uses automatically validated engineering formulas. Results are approximate and should be validated against site-specific conditions, applicable codes, and professional engineering judgment
Related Tools
Forestry Disk Chipper Median Particle Size Predictor calculator
Chipper Knife Maximum Shear Stress from Clearance Angle and Cutting Load calculator
Forestry Harvester Boom Dynamic Load Amplification Factor calculator
Forestry Log Loader Hydraulic Cylinder Actuation Flow Rate Calculator
Forestry Harvester Diesel Fuel Consumption Rate Estimator (BSFC-Map-Based) calculator
Felling Direction Bias Index for Sloped Terrain Calculator
Browse More Tools
Explore the full index of engineering calculators on this vertical site.